Landlord Gas Certificate: What You Must Do

Landlord Gas Certificate: What You Must Do

A boiler may appear to be working perfectly and still have a fault that puts tenants at risk. That is why a landlord gas certificate is not simply paperwork to file away. It is evidence that the gas appliances, flues and associated pipework you are responsible for have been checked by a qualified Gas Safe registered engineer.

For landlords across Thanet and East Kent, arranging the annual check on time protects your tenants, helps avoid an unexpected loss of heating or hot water, and keeps you on the right side of your legal duties. The practical part matters just as much as the certificate: a thorough engineer can identify poor combustion, unsafe flues, leaks and developing boiler faults before they become a more serious problem.

What is a landlord gas certificate?

The document commonly called a landlord gas certificate is formally known as a Gas Safety Record. You may also hear it called a CP12, although that is a widely used industry term rather than the legal name of the record.

It is issued after a Gas Safe registered engineer has completed a gas safety check at a rented property. The record confirms what was inspected, whether the appliances were safe at the time of the visit, any defects found and the action taken. If an appliance is unsafe, it should not be left in service for a tenant to use.

A gas safety check is different from a full boiler service. The safety check focuses on whether an appliance is operating safely. A service is more detailed maintenance, carried out to keep the boiler reliable, efficient and in line with the manufacturer’s instructions. In many rental properties, booking both together is sensible, particularly where the boiler is older or has had previous faults.

Who needs a landlord gas certificate?

In general, private landlords must arrange an annual gas safety check for gas appliances and flues they provide for tenants. This applies whether you rent out a house, flat, bungalow, holiday let covered by the relevant tenancy arrangements, or a single room in a shared property.

Your duties normally cover the gas boiler, gas fires, gas cookers you supply, and the flues serving those appliances. They also extend to relevant gas pipework. If a tenant owns an appliance themselves, such as a cooker they have brought into the property, responsibility can be less straightforward. You are still responsible for the installation pipework and for making sure your own systems do not create a danger.

Communal areas need attention too. If you own a block or house of multiple occupation with shared gas appliances, such as a central boiler serving several homes, those appliances must be included in the safety arrangements.

A competent engineer can explain exactly what should be checked at your property, but they cannot take on the landlord’s legal responsibility for arranging access, acting on defects or giving tenants their records.

Only use a Gas Safe registered engineer

Gas work must be completed by an engineer registered with Gas Safe. Registration matters because gas appliances require specific competence, not just general plumbing experience. Ask to see the engineer’s Gas Safe ID card and check that they are qualified for the type of work being undertaken, whether that is a boiler, cooker, fire or LPG appliance.

Choosing the cheapest appointment without checking credentials is a false economy. A poorly carried out check can miss an unsafe appliance, leave you without reliable documentation and create a much greater cost if there is a breakdown, tenant complaint or enforcement issue later.

When is the annual check due?

Landlords need to have the gas safety check completed at least every 12 months. For a new installation, the first check is due within 12 months of installation. For an existing appliance, use the date of the previous valid Gas Safety Record as your reference point.

There is useful flexibility for landlords who plan ahead. A check can usually be completed between 10 and 12 months after the previous check while preserving the original anniversary date. For example, if last year’s check was done on 20 September, you could arrange this year’s appointment from 20 July onwards and keep a 20 September renewal date. It is a practical way to avoid a rushed booking during a busy period.

Do not wait for the deadline if a boiler is behaving unusually. Repeated lockouts, an unreliable pilot light, soot marks, a yellow or floppy flame, unusual smells or a carbon monoxide alarm sounding all need urgent professional attention. Turn off the appliance if it is safe to do so, ventilate the area and seek advice from a Gas Safe registered engineer. If there is an immediate gas leak concern, call the National Gas Emergency Service on 0800 111 999.

What does a gas safety check include?

A proper inspection is not just a quick look at the boiler. The engineer will assess the appliances and flues within the scope of the check to make sure they are installed, operating and ventilating safely.

This commonly includes checking that appliances are burning gas correctly, that ventilation is suitable, that flues are clear and safely removing combustion products, and that safety devices are working as intended. The engineer will also look for signs of leaks, unsafe connections or poor appliance condition.

The precise tests depend on the appliance and installation. A modern condensing boiler, for instance, has different components and checks from an older open-flued gas fire. Access also matters. Cupboards, boxing and tenant belongings should not prevent safe access to the boiler, meter, flue route or appliances.

If faults are found, the engineer should explain them clearly and record the outcome. Some repairs may be straightforward, such as replacing a worn seal or correcting a boiler fault. In more serious situations, an appliance may need to be capped off or labelled as unsafe until repair or replacement work is completed. This can be inconvenient, but it is the right decision where tenant safety is at stake.

Giving records to tenants and keeping proof

A valid check is only part of the job. You must provide existing tenants with a copy of the Gas Safety Record within 28 days of the check. New tenants must receive a copy before moving in.

Keep the record for at least two years. Digital copies are acceptable, provided tenants can receive and retain them. Many landlords keep a dedicated property compliance folder containing the current record, previous record, boiler service paperwork, repair invoices and dates for upcoming checks. It makes renewals easier and gives you a clear record if there is ever a question about maintenance.

You should also arrange access reasonably and keep evidence of your efforts if a tenant repeatedly prevents a check from taking place. That does not mean a missed appointment can be ignored. Communicate in writing, offer suitable dates and continue making reasonable attempts to complete the safety check.

Carbon monoxide alarms and day-to-day safety

A Gas Safety Record does not replace carbon monoxide alarm duties. In rented homes in England, landlords must ensure there is a working carbon monoxide alarm in each room used as living accommodation that contains a fixed combustion appliance, other than a gas cooker. Alarms should be tested at the start of a new tenancy, and landlords are responsible for repairing or replacing them once they are informed of a fault.

Encourage tenants to report warning signs early rather than waiting for the annual visit. That includes a boiler losing pressure repeatedly, radiators staying cold, hot water cutting out, condensation around a flue, stains near appliances or any alarm activation. Early reporting gives you more choice over repair timing and helps maintain a comfortable home.

Make the annual check easier

Book the appointment well before the due date, ideally during the 10 to 12-month window. Give the tenant clear notice, explain what access is needed and allow enough time for a proper inspection. If the boiler is in a bedroom cupboard, loft space or locked utility room, make sure this is mentioned when arranging the visit.

It is also worth combining the safety check with planned boiler servicing where appropriate. The extra maintenance can help reduce winter breakdowns, protect boiler efficiency and identify worn components before a cold spell puts extra demand on the system.

For landlords in Thanet and the wider East Kent area, Johnson Plumbing & Heating can carry out Gas Safe gas safety checks and explain any findings in plain English. A timely, properly documented check gives your tenants reassurance that the home they live in is being looked after, not merely managed on paper.

Ready to Switch to Greener Heating?

Call us today for a free home survey and find out how much you could save with an air source heat pump.